dmesg - AMD Athlon II X2 215
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-431.5.1.el6.x86_64 (mockbuild@c6b10.bsys.dev.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-4) (GCC) ) #1 SMP Wed Feb 12 00:41:43 UTC 2014
Command line: ro root=/dev/mapper/vg_centosmachine-lv_root rd_NO_LUKS KEYBOARDTYPE=pc KEYTABLE=us LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=vg_centosmachine/lv_swap SYSFONT=latarcyrheb-sun16 rd_LVM_LV=vg_centosmachine/lv_root rd_NO_DM rhgb quiet crashkernel=auto rdblacklist=nouveau nouveau.modeset=0
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000afef0000 (usable)
BIOS-e820: 00000000afef0000 - 00000000afef3000 (ACPI NVS)
BIOS-e820: 00000000afef3000 - 00000000aff00000 (ACPI data)
BIOS-e820: 00000000b0000000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI 2.5 present.
SMBIOS version 2.5 @ 0xF0FE0
DMI: Acer Aspire X1301/WMCP78M, BIOS P01-A0L 08/18/2009
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-D7FFF uncachable
D8000-DBFFF write-protect
DC000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 000100000000 mask FFFFC0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000140000000 aka 5120M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xafef0 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000afef0000
0000000000 - 0080000000 page 1G
0080000000 - 00afe00000 page 2M
00afe00000 - 00afef0000 page 4k
kernel direct mapping tables up to afef0000 @ 10000-13000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-0000000140000000
0100000000 - 0140000000 page 1G
kernel direct mapping tables up to 140000000 @ 12000-13000
RAMDISK: 36f3f000 - 37fef6d9
ACPI: RSDP 00000000000f8340 00014 (v00 ACRSYS)
ACPI: RSDT 00000000afef3000 00038 (v01 ACRSYS ACRPRDCT 42302E31 NVDA 00000000)
ACPI: FACP 00000000afef3080 00074 (v01 ACRSYS ACRPRDCT 42302E31 NVDA 00000000)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 (20090903/tbfadt-561)
ACPI: DSDT 00000000afef3100 0B34B (v01 ACRSYS ACRPRDCT 00001000 MSFT 03000000)
ACPI: FACS 00000000afef1800 00040
ACPI: SSDT 00000000afefe540 0095E (v01 PTLTD POWERNOW 00000001 LTP 00000001)
ACPI: HPET 00000000afefeec0 00038 (v01 ACRSYS ACRPRDCT 42302E31 NVDA 00000098)
ACPI: MCFG 00000000afefef00 0003C (v01 ACRSYS ACRPRDCT 42302E31 NVDA 00000000)
ACPI: APIC 00000000afefe480 0008E (v01 ACRSYS ACRPRDCT 42302E31 NVDA 00000000)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at 0000000000000000-0000000140000000
Bootmem setup node 0 0000000000000000-0000000140000000
NODE_DATA [0000000000012000 - 0000000000045fff]
bootmap [0000000000046000 - 000000000006dfff] pages 28
(7 early reservations) ==> bootmem [0000000000 - 0140000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000201faa4] TEXT DATA BSS ==> [0001000000 - 000201faa4]
#3 [0036f3f000 - 0037fef6d9] RAMDISK ==> [0036f3f000 - 0037fef6d9]
#4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#5 [0002020000 - 000202011c] BRK ==> [0002020000 - 000202011c]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
found SMP MP-table at [ffff8800000f40b0] f40b0
Reserving 129MB of memory at 48MB for crashkernel (System RAM: 5120MB)
[ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bbfffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000afef0
0: 0x00100000 -> 0x00140000
On node 0 totalpages: 982655
DMA zone: 56 pages used for memmap
DMA zone: 102 pages reserved
DMA zone: 3825 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 702248 pages, LIFO batch:31
Normal zone: 3584 pages used for memmap
Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfeff0000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000afef0000 - 00000000afef3000
PM: Registered nosave memory: 00000000afef3000 - 00000000aff00000
PM: Registered nosave memory: 00000000aff00000 - 00000000b0000000
PM: Registered nosave memory: 00000000b0000000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:30000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94872 r8192 d23912 u524288
pcpu-alloc: s94872 r8192 d23912 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 964633
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vg_centosmachine-lv_root rd_NO_LUKS KEYBOARDTYPE=pc KEYTABLE=us LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=vg_centosmachine/lv_swap SYSFONT=latarcyrheb-sun16 rd_LVM_LV=vg_centosmachine/lv_root rd_NO_DM rhgb quiet crashkernel=129M@0M rdblacklist=nouveau nouveau.modeset=0
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 20000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
AMD-Vi disabled by default: pass amd_iommu=on to enable
Memory: 3642992k/5242880k available (5326k kernel code, 1312260k absent, 287628k reserved, 7013k data, 1276k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:440
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 15728640 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2700.025 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5400.05 BogoMIPS (lpj=2700025)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
tseg: 00aff00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
using C1E aware idle routine
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21773 entries in 86 pages
APIC routing finalized to flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) II X2 215 Processor stepping 02
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1
Brought up 2 CPUs
Total of 2 processors activated (10800.10 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at afef0000 (12288 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
node 0 link 0: io port [8000, ffff]
TOM: 00000000c0000000 aka 3072M
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [c0000000, efffffff]
node 0 link 0: mmio [f4000000, fe02ffff]
node 0 link 0: mmio [f0000000, f04fffff]
TOM2: 0000000140000000 aka 5120M
bus: [00, 05] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xc0000000-0xf3ffffff]
bus: 00 [mem 0xf4000000-0xffffffff]
bus: 00 [mem 0x140000000-0xfcffffffff]
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
PCI: MCFG area at f0000000 reserved in E820
PCI: Using MMCONFIG at f0000000 - f3ffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x8000-0xffff]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
pci_root PNP0A08:00: host bridge window [io 0x1c00-0x1c80]
pci_root PNP0A08:00: host bridge window [mem 0xfec80000-0xfecbffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xefffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x8000-0xffff]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x1c00-0x1c80]
pci_bus 0000:00: root bus resource [mem 0xfec80000-0xfecbffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xefffffff]
pci_bus 0000:00: root bus resource [mem 0xf4000000-0xfe02ffff]
pci 0000:00:01.0: reg 18: [io 0x1d00-0x1dff]
pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc3f]
pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f]
pci 0000:00:01.1: reg 24: [io 0x1c40-0x1c7f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:01.3: reg 10: [mem 0xfdf80000-0xfdffffff]
pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:04.0: reg 10: [mem 0xfe02d000-0xfe02dfff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:04.1: reg 10: [mem 0xfe02c000-0xfe02c0ff]
pci 0000:00:04.1: supports D1 D2
pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.1: PME# disabled
pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
pci 0000:00:07.0: reg 10: [mem 0xfe020000-0xfe023fff]
pci 0000:00:07.0: PME# supported from D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:09.0: reg 10: [io 0x09f0-0x09f7]
pci 0000:00:09.0: reg 14: [io 0x0bf0-0x0bf3]
pci 0000:00:09.0: reg 18: [io 0x0970-0x0977]
pci 0000:00:09.0: reg 1c: [io 0x0b70-0x0b73]
pci 0000:00:09.0: reg 20: [io 0xdc00-0xdc0f]
pci 0000:00:09.0: reg 24: [mem 0xfe026000-0xfe027fff]
pci 0000:00:0a.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
pci 0000:00:0a.0: reg 14: [io 0xd800-0xd807]
pci 0000:00:0a.0: reg 18: [mem 0xfe02a000-0xfe02a0ff]
pci 0000:00:0a.0: reg 1c: [mem 0xfe029000-0xfe02900f]
pci 0000:00:0a.0: supports D1 D2
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: PME# disabled
pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: PME# disabled
pci 0000:00:08.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:08.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:08.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:08.0: bridge window [mem 0xfdd00000-0xfddfffff pref]
pci 0000:00:08.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:08.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:08.0: bridge window [io 0x8000-0xffff] (subtractive decode)
pci 0000:00:08.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:08.0: bridge window [io 0x1c00-0x1c80] (subtractive decode)
pci 0000:00:08.0: bridge window [mem 0xfec80000-0xfecbffff] (subtractive decode)
pci 0000:00:08.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:08.0: bridge window [mem 0xc0000000-0xefffffff] (subtractive decode)
pci 0000:00:08.0: bridge window [mem 0xf4000000-0xfe02ffff] (subtractive decode)
pci 0000:02:00.0: reg 10: [mem 0xfb000000-0xfbffffff]
pci 0000:02:00.0: reg 14: [mem 0xd8000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xe6000000-0xe7ffffff 64bit pref]
pci 0000:02:00.0: reg 24: [io 0xbc00-0xbc7f]
pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:0b.0: PCI bridge to [bus 02-02]
pci 0000:00:0b.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0b.0: bridge window [mem 0xfb000000-0xfcffffff]
pci 0000:00:0b.0: bridge window [mem 0xd8000000-0xe7ffffff 64bit pref]
pci 0000:00:10.0: PCI bridge to [bus 03-03]
pci 0000:00:10.0: bridge window [io 0xa000-0xafff]
pci 0000:00:10.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:10.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:00:12.0: PCI bridge to [bus 04-04]
pci 0000:00:12.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:12.0: bridge window [mem 0xfda00000-0xfdafffff]
pci 0000:00:12.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
pci 0000:05:00.0: reg 10: [mem 0xfd8ff000-0xfd8ff7ff 64bit]
pci 0000:05:00.0: reg 18: [io 0x8c00-0x8cff]
pci 0000:05:00.0: supports D2
pci 0000:05:00.0: PME# supported from D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:13.0: PCI bridge to [bus 05-05]
pci 0000:00:13.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:13.0: bridge window [mem 0xfd800000-0xfd8fffff]
pci 0000:00:13.0: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
Firmware did not grant requested _OSC control
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE0A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE0B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE0C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE0D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE1A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE1B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE1C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE1D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE2A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE2B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE2C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE2D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE3A] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LE3B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE3C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE3D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE4A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE4B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE4C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE4D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE5A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE5B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE5C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE5D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE6A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE6B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE6C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE6D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE7A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE7B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE7C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LE7D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LU1B] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LU2B] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [AE0A] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE0B] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE0C] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE0D] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE1A] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE1B] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE1C] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE1D] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE2A] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE2B] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE2C] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE2D] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE3A] (IRQs 16) *0
ACPI: PCI Interrupt Link [AE3B] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE3C] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE3D] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE4A] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE4B] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE4C] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE4D] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE5A] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE5B] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE5C] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE5D] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE6A] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE6B] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE6C] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE6D] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE7A] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE7B] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE7C] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AE7D] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:01.0: no compatible bridge window for [io 0x1d00-0x1dff]
pci 0000:00:01.0: can't reserve [io 0x1d00-0x1dff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0800-0x0805]
pnp 00:01: [io 0x1000-0x107f]
pnp 00:01: [io 0x1080-0x10ff]
pnp 00:01: [io 0x1400-0x147f]
pnp 00:01: [io 0x1480-0x14ff]
pnp 00:01: [io 0x1800-0x187f]
pnp 00:01: [io 0x1880-0x18ff]
pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:01: [mem 0xfefe1000-0xfefe10ff]
pnp 00:01: [mem 0xb0000000-0xbfffffff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0010-0x001f]
pnp 00:02: [io 0x0022-0x003f]
pnp 00:02: [io 0x0044-0x005f]
pnp 00:02: [io 0x0062-0x0063]
pnp 00:02: [io 0x0065-0x006f]
pnp 00:02: [io 0x0074-0x007f]
pnp 00:02: [io 0x0091-0x0093]
pnp 00:02: [io 0x00a2-0x00bf]
pnp 00:02: [io 0x00e0-0x00ef]
pnp 00:02: [io 0x04d0-0x04d1]
pnp 00:02: [io 0x0295-0x0314]
pnp 00:02: disabling [io 0x0010-0x001f] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
pnp 00:02: disabling [io 0x0022-0x003f] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
pnp 00:02: disabling [io 0x0044-0x005f] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
pnp 00:02: disabling [io 0x0062-0x0063] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
pnp 00:02: disabling [io 0x0065-0x006f] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
pnp 00:02: disabling [io 0x0074-0x007f] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
pnp 00:02: disabling [io 0x0091-0x0093] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
pnp 00:02: disabling [io 0x00a2-0x00bf] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
pnp 00:02: disabling [io 0x00e0-0x00ef] because it overlaps 0000:00:01.0 BAR 2 [io 0x0000-0x00ff]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io 0x0000-0x000f]
pnp 00:03: [io 0x0080-0x0090]
pnp 00:03: [io 0x0094-0x009f]
pnp 00:03: [io 0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [irq 0 disabled]
pnp 00:04: [irq 8]
pnp 00:04: [mem 0xfeff0000-0xfeff03ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io 0x0070-0x0073]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x00f0-0x00ff]
pnp 00:07: [irq 13]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: [mem 0xf0000000-0xf3ffffff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [mem 0x000f0000-0x000fffff]
pnp 00:09: [mem 0xfeff0000-0xfeff00ff]
pnp 00:09: [mem 0xafef0000-0xafefffff]
pnp 00:09: [mem 0xffff0000-0xffffffff]
pnp 00:09: [mem 0x00000000-0x0009ffff]
pnp 00:09: [mem 0x00100000-0xafeeffff]
pnp 00:09: [mem 0xb0000000-0xbfffffff]
pnp 00:09: [mem 0xfec00000-0xfec00fff]
pnp 00:09: [mem 0xfee00000-0xfeefffff]
pnp 00:09: [mem 0xfefff000-0xfeffffff]
pnp 00:09: [mem 0xfff80000-0xfff80fff]
pnp 00:09: [mem 0xfff90000-0xfffbffff]
pnp 00:09: [mem 0xfffed000-0xfffeffff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io 0x0800-0x0805] has been reserved
system 00:01: [io 0x1000-0x107f] has been reserved
system 00:01: [io 0x1080-0x10ff] has been reserved
system 00:01: [io 0x1400-0x147f] has been reserved
system 00:01: [io 0x1480-0x14ff] has been reserved
system 00:01: [io 0x1800-0x187f] has been reserved
system 00:01: [io 0x1880-0x18ff] has been reserved
system 00:01: [mem 0xfefe1000-0xfefe10ff] has been reserved
system 00:01: [mem 0xb0000000-0xbfffffff] has been reserved
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [io 0x0295-0x0314] has been reserved
system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:09: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:09: [mem 0xfeff0000-0xfeff00ff] has been reserved
system 00:09: [mem 0xafef0000-0xafefffff] could not be reserved
system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:09: [mem 0x00100000-0xafeeffff] could not be reserved
system 00:09: [mem 0xb0000000-0xbfffffff] has been reserved
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:09: [mem 0xfefff000-0xfeffffff] has been reserved
system 00:09: [mem 0xfff80000-0xfff80fff] has been reserved
system 00:09: [mem 0xfff90000-0xfffbffff] has been reserved
system 00:09: [mem 0xfffed000-0xfffeffff] has been reserved
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:01.0: BAR 2: assigned [io 0xd000-0xd0ff]
pci 0000:00:01.0: BAR 2: set to [io 0xd000-0xd0ff] (PCI address [0xd000-0xd0ff]
pci 0000:00:08.0: PCI bridge to [bus 01-01]
pci 0000:00:08.0: PCI bridge to [bus 01-01]
pci 0000:00:08.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:08.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:08.0: bridge window [mem 0xfdd00000-0xfddfffff pref]
pci 0000:02:00.0: BAR 6: assigned [mem 0xe0000000-0xe001ffff pref]
pci 0000:00:0b.0: PCI bridge to [bus 02-02]
pci 0000:00:0b.0: PCI bridge to [bus 02-02]
pci 0000:00:0b.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0b.0: bridge window [mem 0xfb000000-0xfcffffff]
pci 0000:00:0b.0: bridge window [mem 0xd8000000-0xe7ffffff 64bit pref]
pci 0000:00:10.0: PCI bridge to [bus 03-03]
pci 0000:00:10.0: PCI bridge to [bus 03-03]
pci 0000:00:10.0: bridge window [io 0xa000-0xafff]
pci 0000:00:10.0: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:10.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:00:12.0: PCI bridge to [bus 04-04]
pci 0000:00:12.0: PCI bridge to [bus 04-04]
pci 0000:00:12.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:12.0: bridge window [mem 0xfda00000-0xfdafffff]
pci 0000:00:12.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
pci 0000:00:13.0: PCI bridge to [bus 05-05]
pci 0000:00:13.0: PCI bridge to [bus 05-05]
pci 0000:00:13.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:13.0: bridge window [mem 0xfd800000-0xfd8fffff]
pci 0000:00:13.0: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref]
pci 0000:00:08.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
ACPI: PCI Interrupt Link [AE0A] enabled at IRQ 16
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
pci 0000:00:10.0: PCI INT A -> Link[AE0A] -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:10.0: setting latency timer to 64
ACPI: PCI Interrupt Link [AE2A] enabled at IRQ 16
pci 0000:00:12.0: PCI INT A -> Link[AE2A] -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:12.0: setting latency timer to 64
ACPI: PCI Interrupt Link [AE3A] enabled at IRQ 16
pci 0000:00:13.0: PCI INT A -> Link[AE3A] -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:13.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x8000-0xffff]
pci_bus 0000:00: resource 7 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 8 [io 0x1c00-0x1c80]
pci_bus 0000:00: resource 9 [mem 0xfec80000-0xfecbffff]
pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 11 [mem 0xc0000000-0xefffffff]
pci_bus 0000:00: resource 12 [mem 0xf4000000-0xfe02ffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:01: resource 2 [mem 0xfdd00000-0xfddfffff pref]
pci_bus 0000:01: resource 4 [io 0x0000-0x03af]
pci_bus 0000:01: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:01: resource 6 [io 0x8000-0xffff]
pci_bus 0000:01: resource 7 [io 0x03b0-0x03df]
pci_bus 0000:01: resource 8 [io 0x1c00-0x1c80]
pci_bus 0000:01: resource 9 [mem 0xfec80000-0xfecbffff]
pci_bus 0000:01: resource 10 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 11 [mem 0xc0000000-0xefffffff]
pci_bus 0000:01: resource 12 [mem 0xf4000000-0xfe02ffff]
pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:02: resource 1 [mem 0xfb000000-0xfcffffff]
pci_bus 0000:02: resource 2 [mem 0xd8000000-0xe7ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff]
pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:05: resource 1 [mem 0xfd800000-0xfd8fffff]
pci_bus 0000:05: resource 2 [mem 0xfd700000-0xfd7fffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23
alloc irq_desc for 23 on node 0
alloc kstat_irqs on node 0
pci 0000:00:02.0: PCI INT A -> Link[AUBA] -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:02.0: PCI INT A disabled
ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22
alloc irq_desc for 22 on node 0
alloc kstat_irqs on node 0
pci 0000:00:02.1: PCI INT B -> Link[AUB2] -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:02.1: PCI INT B disabled
ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 21
alloc irq_desc for 21 on node 0
alloc kstat_irqs on node 0
pci 0000:00:04.0: PCI INT A -> Link[AU1B] -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:04.0: PCI INT A disabled
ACPI: PCI Interrupt Link [AU2B] enabled at IRQ 20
alloc irq_desc for 20 on node 0
alloc kstat_irqs on node 0
pci 0000:00:04.1: PCI INT B -> Link[AU2B] -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:04.1: PCI INT B disabled
pci 0000:00:08.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Enabling HT MSI Mapping
pci 0000:00:0a.0: Enabling HT MSI Mapping
pci 0000:00:0b.0: Enabling HT MSI Mapping
pci 0000:02:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17089k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
audit: initializing netlink socket (disabled)
type=2000 audit(1395011095.436:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7148
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 46712A08B7477BD
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Unable to find any System Interface(s)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN] (on)
ACPI: acpi_idle registered with cpuidle
ACPI Exception: AE_NOT_FOUND, No or invalid critical threshold (20090903/thermal-386)
ACPI Warning for \_TZ_.THRM._PSL: Return Package has no elements (empty) (20090903/nspredef-440)
ACPI: [Package] has zero elements (ffff88013949bf40)
ACPI: Invalid passive threshold
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (52 C)
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:02.1: PCI INT B -> Link[AUB2] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-431.5.1.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:04.1: PCI INT B -> Link[AU2B] -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:04.1: setting latency timer to 64
ehci_hcd 0000:00:04.1: EHCI Host Controller
ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:04.1: debug port 1
ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
ehci_hcd 0000:00:04.1: irq 20, io mem 0xfe02c000
ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-431.5.1.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:04.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:02.0: PCI INT A -> Link[AUBA] -> GSI 23 (level, low) -> IRQ 23
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-431.5.1.el6.x86_64 ohci_hcd
usb usb3: SerialNumber: 0000:00:02.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
ohci_hcd 0000:00:04.0: PCI INT A -> Link[AU1B] -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:04.0: setting latency timer to 64
ohci_hcd 0000:00:04.0: OHCI Host Controller
ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:04.0: irq 21, io mem 0xfe02d000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-431.5.1.el6.x86_64 ohci_hcd
usb usb4: SerialNumber: 0000:00:04.0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:05: setting system clock to 2014-03-16 23:04:56 UTC (1395011096)
Initalizing network drop monitor service
Freeing unused kernel memory: 1276k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 800k freed
Freeing unused kernel memory: 1584k freed
dracut: dracut-004-336.el6_5.2
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
usb 1-3: new high speed USB device number 2 using ehci_hcd
ata2: port disabled. ignoring.
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
pata_acpi 0000:00:09.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
pata_acpi 0000:00:09.0: setting latency timer to 64
pata_acpi 0000:00:09.0: PCI INT A disabled
usb 1-3: New USB device found, idVendor=058f, idProduct=6363
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: Mass Storage Device
usb 1-3: Manufacturer: Generic
usb 1-3: SerialNumber: 058F63636476
usb 1-3: configuration #1 chosen from 1 choice
ahci 0000:00:09.0: version 3.0
ahci 0000:00:09.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
alloc irq_desc for 24 on node 0
alloc kstat_irqs on node 0
ahci 0000:00:09.0: irq 24 for MSI/MSI-X
ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio boh
ahci 0000:00:09.0: setting latency timer to 64
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
generic-usb: probe of 0003:058F:6363.0001 failed with error -22
ata3: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026100 irq 24
ata4: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 24
ata5: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 24
ata6: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026280 irq 24
ata7: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026300 irq 24
ata8: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026380 irq 24
ata7: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
usb 4-4: new full speed USB device number 2 using ohci_hcd
Refined TSC clocksource calibration: 2699.999 MHz.
Switching to clocksource tsc
usb 4-4: New USB device found, idVendor=04ca, idProduct=0064
usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-4: Product: Wireless Device
usb 4-4: Manufacturer: Lite-On Technology Corp.
usb 4-4: configuration #1 chosen from 1 choice
input: Lite-On Technology Corp. Wireless Device as /devices/pci0000:00/0000:00:04.0/usb4/4-4/4-4:1.0/input/input3
generic-usb 0003:04CA:0064.0002: input,hidraw0: USB HID v1.11 Keyboard [Lite-On Technology Corp. Wireless Device] on usb-0000:00:04.0-4/input0
input: Lite-On Technology Corp. Wireless Device as /devices/pci0000:00/0000:00:04.0/usb4/4-4/4-4:1.1/input/input4
generic-usb 0003:04CA:0064.0003: input,hiddev96,hidraw1: USB HID v1.11 Device [Lite-On Technology Corp. Wireless Device] on usb-0000:00:04.0-4/input1
input: Lite-On Technology Corp. Wireless Device as /devices/pci0000:00/0000:00:04.0/usb4/4-4/4-4:1.2/input/input5
generic-usb 0003:04CA:0064.0004: input,hidraw2: USB HID v1.11 Mouse [Lite-On Technology Corp. Wireless Device] on usb-0000:00:04.0-4/input2
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATA-8: Hitachi HDT721010SLA360, ST6OA31B, max UDMA/133
ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA Hitachi HDT72101 ST6O PQ: 0 ANSI: 5
ata5.00: ATAPI: HL-DT-ST DVDRAM GH41N, MN01, max UDMA/100, ATAPI AN
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GH41N MN01 PQ: 0 ANSI: 5
[Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0f/LNXVIDEO:00/input/input6
ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
ACPI: WMI: Mapper loaded
usb 4-5: new low speed USB device number 3 using ohci_hcd
firewire_ohci 0000:05:00.0: PCI INT A -> Link[AE3A] -> GSI 16 (level, low) -> IRQ 16
firewire_ohci 0000:05:00.0: setting latency timer to 64
firewire_ohci: Added fw-ohci device 0000:05:00.0, OHCI version 1.10
sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 3:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
Initializing USB Mass Storage driver...
scsi8 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 4-5: New USB device found, idVendor=04f3, idProduct=02f4
usb 4-5: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-5: Product: 2.4G Wireless Mouse
usb 4-5: configuration #1 chosen from 1 choice
input: 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:04.0/usb4/4-5/4-5:1.0/input/input7
generic-usb 0003:04F3:02F4.0005: input,hiddev97,hidraw3: USB HID v1.11 Mouse [2.4G Wireless Mouse] on usb-0000:00:04.0-5/input0
dracut: Scanning devices sda2 for LVM logical volumes vg_centosmachine/lv_swap vg_centosmachine/lv_root
dracut: inactive '/dev/vg_centosmachine/lv_root' [50.00 GiB] inherit
dracut: inactive '/dev/vg_centosmachine/lv_home' [877.39 GiB] inherit
dracut: inactive '/dev/vg_centosmachine/lv_swap' [3.62 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
firewire_core: created device fw0: GUID 001d72ffb2ccd1ff, S400
dracut: Mounted root filesystem /dev/mapper/vg_centosmachine-lv_root
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1395011098.658:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
usb-storage: device scan complete
scsi 8:0:0:0: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
scsi 8:0:0:1: Direct-Access Multiple Flash Reader 1.05 PQ: 0 ANSI: 0
sd 8:0:0:0: [sdb] Attached SCSI removable disk
sd 8:0:0:1: [sdc] Attached SCSI removable disk
udev: starting version 147
i2c i2c-0: nForce2 SMBus adapter at 0x1c00
i2c i2c-1: nForce2 SMBus adapter at 0x1c40
sd 3:0:0:0: Attached scsi generic sg0 type 0
sr 4:0:0:0: Attached scsi generic sg1 type 5
sd 8:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:1: Attached scsi generic sg3 type 0
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
snd_hda_intel 0000:00:07.0: PCI INT A -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22
hda_intel: Disabling MSI
snd_hda_intel 0000:00:07.0: setting latency timer to 64
input: HDA NVidia HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:07.0/sound/card0/input8
input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input9
input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:07.0/sound/card0/input10
input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:07.0/sound/card0/input11
input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:07.0/sound/card0/input12
input: HDA NVidia Line as /devices/pci0000:00/0000:00:07.0/sound/card0/input13
input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input14
input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input15
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 21 (level, low) -> IRQ 21
forcedeth 0000:00:0a.0: setting latency timer to 64
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1f:16:fd:2c:4f
forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 2.1.0 Feb 12 2014
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
acer-wmi: Acer Laptop ACPI-WMI Extras
platform microcode: firmware: requesting amd-ucode/microcode_amd.bin
microcode: CPU0: patch_level=0x100009f
microcode: CPU0: updated (new patch_level=0x10000c7)
microcode: CPU1: patch_level=0x100009f
microcode: CPU1: updated (new patch_level=0x10000c7)
Microcode Update Driver: v2.00 , Peter Oruba
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
Adding 3801080k swap on /dev/mapper/vg_centosmachine-lv_swap. Priority:-1 extents:1 across:3801080k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
powernow-k8: Found 1 AMD Athlon(tm) II X2 215 Processor (2 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (2700 MHz)
powernow-k8: 1 : pstate 1 (2100 MHz)
powernow-k8: 2 : pstate 2 (1500 MHz)
powernow-k8: 3 : pstate 3 (800 MHz)
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.16 (Dec 05, 2012)
bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v2.4.1 (Sep 17, 2013)
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
netlink: 12 bytes leftover after parsing attributes.
alloc irq_desc for 25 on node 0
alloc kstat_irqs on node 0
forcedeth 0000:00:0a.0: irq 25 for MSI/MSI-X
eth0: no IPv6 routers present
fuse init (API version 7.13)
lo: Disabled Privacy Extensions
lo: Disabled Privacy Extensions
Bridge firewalling registered